Water Pump Impeller

🔧 CFMoto Water Pump Impeller

📦 Part Number: 0GRV-081005-5000

⚙️ Water Pump Impeller · Coolant Pump Rotor · OEM Spec

📍 Installation: Inside pump housing · Impeller chamber

✅ Single unit · Premium engineering plastic/metal · OEM specification · Fits multiple CFMoto ATV models

This is a CFMoto OEM-spec water pump impeller, part number 0GRV-081005-5000, sold as a single unit. The impeller is the core working component of the engine cooling system water pump, installed inside the pump housing and driven by the pump shaft. It generates centrifugal force to push coolant from the pump inlet to the engine water jacket, enabling forced coolant circulation.

The water pump impeller operates at high speed in hot coolant and may suffer from wear, corrosion, aging, or impact damage — resulting in reduced pump flow, decreased cooling efficiency, and in severe cases, engine overheating. Replacing it promptly with an OEM-spec impeller is essential to restore pump performance and maintain proper engine operating temperature.

• ✅ OEM Specification: Manufactured to CFMoto's original technical standards. Dimensions and mounting interfaces are identical to genuine parts.
• 🛡️ Premium Corrosion-Resistant Material: Made from high-strength, corrosion-resistant, heat-resistant material for long-term reliability in coolant.
• 🔧 Precision Molding: Precision-molded and dynamically balanced for smooth operation and high efficiency at high speed.
• 💪 Efficient Drive: Optimized blade design provides ample coolant flow and pressure.
• 🔄 Direct Replacement: Can be used to directly replace worn, corroded, or damaged original pump impellers.

✅ Typical signs that the water pump impeller needs replacement:
• Engine overheating with high temperature gauge readings.
• Reduced pump efficiency and poor coolant circulation.
• Unusual noise (grinding or vibration) from the water pump during operation.
• Inspection after pump disassembly reveals wear, corrosion, cracks, or broken blades.
• Pump shaft turns freely but flow rate is significantly reduced.
If any of these signs appear, please inspect and replace the water pump impeller promptly.

✅ Installation Tips:
1. Confirm the impeller part number is 0GRV-081005-5000 and matches your vehicle.
2. Drain coolant and remove the water pump assembly.
3. Disassemble the pump housing and remove the old impeller.
4. Inspect the pump shaft and bearings; replace if necessary.
5. Clean the impeller chamber and mounting area.
6. Install the new impeller, ensuring it is fully seated and securely fastened.
7. Reassemble the pump, install it on the engine, refill coolant, and bleed air from the system.
Professional installation is recommended. Check for coolant leaks after installation.

⚠️ Important Notice: This product is a CFMoto water pump impeller, part number 0GRV-081005-5000, single unit. Fits the listed CFMoto ATV models. Minor variations may exist between production batches. If your specific model is not listed, please contact us with your VIN to confirm compatibility. Images are for reference only; actual product may differ slightly.