Water Pump Seal Strip

🔧 CFMoto Water Pump Seal Strip

📦 Part Number: 0GRV-081003-5000

⚙️ Water Pump Seal Strip · Coolant Pump O-Ring · OEM Spec

📍 Installation: Water pump housing seal · Pump cover seal

✅ Single unit · Premium oil-resistant rubber · OEM specification · Fits multiple CFMoto ATV models

This is a CFMoto OEM-spec water pump seal strip, part number 0GRV-081003-5000, sold as a single unit. This seal strip is a critical sealing component of the engine cooling system's water pump, installed between the pump housing and cover to prevent coolant leakage from the joint surface, ensuring cooling system integrity and proper operating pressure.

The water pump seal strip is constantly exposed to hot coolant and oil, and may become aged, hardened, deformed, or damaged — leading to coolant seepage, reduced pump efficiency, and in severe cases, engine overheating. Replacing it promptly with an OEM-spec seal strip is essential to restore cooling system sealing and maintain proper engine operating temperature.

• ✅ OEM Specification: Manufactured to CFMoto's original technical standards. Dimensions and cross-section shape are identical to genuine parts.
• 🛡️ Premium Oil-Resistant Rubber: Made from high-temperature, coolant-resistant, oil-resistant rubber for long-term reliability.
• 🔧 Precision Molding: Precision-molded to ensure perfect fitment with the pump housing seal groove and reliable sealing.
• 💪 Reliable Sealing: Effectively prevents coolant leakage from the pump joint surface, ensuring proper cooling system operation.
• 🔄 Direct Replacement: Can be used to directly replace aged, hardened, or damaged original water pump seal strips.

✅ Typical signs that the water pump seal strip needs replacement:
• Coolant seepage or dripping from the water pump joint surface.
• Coolant level constantly dropping, requiring frequent topping up.
• Coolant residue or crystallization visible around the water pump area.
• Inspection after pump disassembly reveals aged, hardened, deformed, or cracked seal strip.
• Leakage persists even with properly torqued pump cover bolts.
If any of these signs appear, please inspect and replace the water pump seal strip promptly.

✅ Installation Tips:
1. Confirm the seal strip part number is 0GRV-081003-5000 and matches your vehicle.
2. Drain coolant to an appropriate level and remove the water pump cover.
3. Remove the old seal strip and clean the seal grooves on both housing and cover.
4. Inspect the seal grooves for any damage or deformation.
5. Install the new seal strip into the groove, ensuring it sits flat without twisting.
6. Reinstall the pump cover and torque bolts to specification.
7. Refill coolant, bleed air from the system, and check for leaks.
Do not twist or stretch the seal strip during installation. Professional installation is recommended.

⚠️ Important Notice: This product is a CFMoto water pump seal strip, part number 0GRV-081003-5000, single unit. Fits the listed CFMoto ATV models. Minor variations may exist between production batches. If your specific model is not listed, please contact us with your VIN to confirm compatibility. Images are for reference only; actual product may differ slightly.