CG Sleeve of Rear Absorber

CG Rear Shock Absorber Bushing

🔧 Shock Bushing · Rear Shock Mount · Suspension Bushing · CG Series Specific

Excellent Replacement for Original Rear Shock Bushing · Size: Φ25×Φ12×35mm

This is the CG Rear Shock Absorber Bushing — an excellent replacement for the motorcycle's original rear shock absorber bushing. This component is a vital part of the suspension system, connecting the shock absorber to the frame or swingarm, providing vibration damping, reducing friction, and absorbing impact.

The shock absorber bushing (also known as shock mount bushing or suspension bushing) is installed in the upper and lower mounting holes of the shock absorber. It consists of an outer metal shell, a rubber core, and an inner metal sleeve. When the vehicle travels over rough roads, the bushing absorbs vibrations and impacts from the road while allowing the shock absorber to pivot within a certain range, ensuring proper suspension operation. This is the perfect replacement when the original bushing exhibits aging, cracking, deformation, or wear.

This rear shock absorber bushing is compatible with the following vehicles and applications:

• Vehicle Types: Honda CG series, Chinese-made CG series motorcycles, dirt bikes, street bikes, cruisers
• Mounting Location: Upper and lower rear shock absorber mounting points (universal fit)
• Applications: Shock bushing aging replacement, noise repair, suspension maintenance, shock absorber service
• Dimensions: Φ25×Φ12×35mm

• High-Quality Rubber Material: Made from premium aging-resistant rubber with excellent elasticity and fatigue resistance for long service life.
• Precision Metal Components: Inner and outer metal sleeves are made from high-quality steel with rust-resistant coating and precise dimensions.
• Accurate Dimensions: Manufactured to Φ25×Φ12×35mm specifications for tight fit with shock absorber and frame.
• Excellent Cushioning Performance: Optimized rubber hardness provides effective damping while allowing smooth suspension articulation.
• Wide Application: Universal design fits most CG series motorcycle rear shock absorbers.
• Excellent Value: High cost-performance ratio makes it an ideal choice for suspension maintenance and repair.

🔧 Installation Guide

1. Securely support the vehicle and raise the rear wheel using a jack or stand to relieve shock absorber load.
2. Remove the upper and lower mounting bolts and take off the shock absorber.
3. Use a bushing tool or press to push out the old bushing from the shock mounting hole.
4. Clean the mounting hole inner surface, removing rust and debris.
5. Apply a small amount of lubricant to the outer surface of the new bushing and press it evenly into the mounting hole using a press or tool.
6. Ensure the bushing is fully seated, flush with the mounting hole end faces.
7. Reinstall the shock absorber and tighten the mounting bolts to the specified torque.
8. Lower the vehicle and test shock absorber operation, checking for unusual noise.

⚠️ Important Notice: This product is the CG Rear Shock Absorber Bushing with dimensions Φ25×Φ12×35mm, designed for CG series motorcycle rear shocks.
Spec Confirmation: Before purchasing, verify that your original shock bushing dimensions match this product (25mm OD, 12mm ID, 35mm length) to ensure compatibility.
Installation Caution: Shock bushing installation requires proper tools. Professional installation is strongly recommended. Ensure even pressure when pressing in the bushing to avoid damaging the rubber. Product images are for reference only; please refer to the actual product.