• Your shopping cart is empty!
Oil Pump Gasket - Model MICF0180-070002
CFMoto Oil Pump Gasket 0180-070002 CF188-070002 35206 1BE-13475-00 - X5 X6 UForce 500 Z6 

Oil Pump Gasket

  • Brand: Mortch Motor
  • Product Code: MICF0180-070002
  • Product Viewed: 628
    •
  • Availability: In Stock
  • Weight: 0.00kg
    •

0 reviews / Write a review

  • US$0.25 37 SOLD


Shipping To：
More Quotes
Qty

Buy Now

CFMoto Oil Pump Gasket

OEM Part No. 0180-070002 (Old No. CF188-070002)

High-quality sealing gasket for oil pump to engine case, preventing oil leakage.

📋 Product Overview

This oil pump gasket is a high-quality genuine CFMoto replacement part, directly replacing OEM part number 0180-070002 (old number CF188-070002). Installed between the oil pump and engine crankcase, it ensures the oil pump can effectively build and maintain oil pressure while preventing oil leakage from the mating surface.

The oil pump gasket is a critical sealing component in the engine lubrication system. Under long-term exposure to high-temperature, high-pressure oil, the gasket material may age, harden, and lose elasticity, leading to oil seepage, pressure drop, and potentially severe engine damage due to inadequate lubrication.

✨ Genuine Quality: Manufactured from oil-resistant, high-temperature resistant composite material with precise dimensions ensuring perfect fitment and reliable sealing performance.

📐 Parts Information & Cross-Reference
New Part No. 0180-070002
Old Part No. CF188-070002
Linhai Code 35206 1BE-13475-00
(GASKET, OIL PUMP)
Component Name Oil Pump Gasket
Material Oil & Heat Resistant Composite

📌 Cross-Reference Note: CFMoto part number 0180-070002 / CF188-070002 corresponds to Linhai code 35206 / 1BE-13475-00 (GASKET, OIL PUMP) for easy multi-system inventory management and ordering.

📦 Kit Contents
  • 1 x CFMoto Oil Pump Gasket (OEM specification)
  • This product includes the gasket only. Mounting bolts or sealant are not included.

Note: It is recommended to replace the gasket whenever the oil pump is removed or during engine overhaul. Do not reuse old gaskets.

🔧 Applicable Models
🏍️ CF188 (500cc) – X5, UForce 500
  • ATV CF500 X5 (CF188)
  • ATV CF500-2 X5 (CF188)
  • ATV CF500-2A X5 (CF188)
  • ATV CF500-5 X5 (CF188)
  • ATV CF500-5A X5 (CF188)
  • ATV CF500-5B X5 (CF188-B)
  • ATV CF500-5C X5 (CF188-B)
  • ATV CF500-A X5 (CF188)
  • ATV CF500-B X5 (CF188)
  • ATV CF500-C X5 (CF188)
  • ATV CF500-D X5 (CF188)
  • ATV CF500-E X5 (CF188)
  • UTV CF500-3 UForce 500 U5 (CF188-A)
🏍️ 196S (600/625cc) – X6, UForce U6, Z6
  • ATV CF600-B X6 (196S-B)
  • ATV CF600-C X6 (196S-B)
  • ATV CF625-2 X6 (196S-B)
  • ATV CF625-2A X6 (196S-B)
  • ATV CF625-B X6 (196S-B)
  • ATV CF625-C X6 (196S-B)
  • UTV CF600-5 UForce U6 (196S-B)
  • SSV CF600-3 Z6 (196S-C)
  • SSV CF600-6 Z6 (196S-C)
  • SSV CF625-3 Z6 (196S-C)
  • SSV CF625-6 Z6 (196S-C)

📌 Compatibility Note: This oil pump gasket fits the CFMoto models listed above, primarily equipped with CF188 and 196S series engines. Please verify your model and engine type before ordering.

⚙️ Features
  • Direct OEM Replacement: Perfectly matches CFMoto OEM part numbers 0180-070002 and CF188-070002, ensuring precise fitment.
  • Premium Composite Material: Made from oil-resistant, high-temperature resistant composite that maintains sealing performance in harsh engine environments.
  • Precision Die-Cut: Accurate gasket轮廓 with all bolt holes and oil passages correctly positioned for interference-free installation.
  • Prevents Oil Leaks: Effectively seals the oil pump to crankcase mating surface, preventing oil seepage and maintaining proper oil pressure.
  • Essential for Engine Overhaul: Recommended to replace gasket whenever the oil pump is removed or during engine overhaul to ensure sealing reliability.
✅ Importance of Oil Pump Gasket Replacement: Gaskets exposed to high-temperature, high-pressure oil gradually harden, shrink, and lose elasticity, leading to seal failure. Oil leakage not only reduces oil quantity but also causes pressure drop, increasing engine wear risk. Always replace the gasket after each oil pump removal – never reuse an old gasket.
🔧 Installation Guide

Installation Steps Overview:

  1. Disconnect the negative battery terminal and drain engine oil into a suitable container.
  2. Remove oil pump mounting bolts and take off the oil pump.
  3. Thoroughly clean the oil pump mounting surface and engine crankcase mating surface, removing all old gasket residue, oil, and debris.
  4. Position the new gasket, aligning bolt holes and oil passages.
  5. Reinstall the oil pump and tighten mounting bolts diagonally to factory torque specification (typically 8-12 N·m).
  6. Refill with oil to the proper level, start the engine, and inspect the mating surface for leaks.
⚠️ Installation Note: Ensure the oil pump and engine mating surfaces are clean, flat, and free of oil before installation. Tighten mounting bolts to the specified torque. Incorrect torque may damage the gasket or cause poor sealing.
🔄 Linhai Cross-Reference: 35206 / 1BE-13475-00 integrated for multi-system inventory management.
🔧 Compatibility Notice
  • Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
  • We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.
📄 Product Disclaimer
  • Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
  • Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.
💰 Import Duties & Taxes
  • All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
  • In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.
📌 Order Confirmation: By completing your purchase, you acknowledge that you have read, understood, and agreed to all terms above. For any questions, please contact our support team prior to ordering.

Be the first to write a review for this product.

Write a review

Please login or register to review

 Thank You

Thank you for recommending us to your friends.

We really appreciate it.

 Please tell your friends about our Oil Pump Gasket

Please enter email address for your friend(s):

The email that will be sent will contain your name and email address.

*We do not store these email addresses on our system*

Ask a Question

Captcha

Related Products

Information
Customer Service
Extras
My Account
Online Service
WhatsApp
Messenger
Telegram
WeChat
QQ

Powered By Mortch Inc
Mortch Motor Order System © 2026