Mitsuboshi CVT Belt 37.4*1122

CFMoto Mitsuboshi Belt 37.4*1122

OEM Part Number 0NYV-054000-5000

🔧 CVT Drive Belt · Mitsuboshi

OEM quality · Direct replacement · Ensures efficient CVT power transfer

This is a genuine OEM-spec CFMoto Mitsuboshi CVT Drive Belt, part number 0NYV-054000-5000, size 37.4 × 1122 mm. Manufactured by the renowned brand Mitsuboshi, this belt is a core component of the CVT system, responsible for smoothly and efficiently transmitting engine power to the driven pulley. This direct replacement part restores proper CVT function. Fits specific CFMoto ZForce series SSV models.

⚠️ Avoiding CVT Drive Belt and Component Problems

CVT clutch and belt life can be dramatically extended by avoiding these common operating mistakes:

Causes CVT damage:	Solution:
Attempting to load the vehicle onto a truck bed or tall trailer in high gear.	Shift transmission to low gear during loading of the vehicle to prevent belt burning.
Starting out on a steep incline in high gear.	When starting out on steep inclines, use low gear.
Constant driving at low RPM, driving at just above clutch engagement RPM, or at low speed (approximately 3-6 mph [5-10 km/h]) in high gear.	Low gear is highly recommended for cooler CVT operating temperatures and longer component life. Drive at a higher speed or use low gear more frequently.
Insufficient warm-up of CVT exposed to low ambient temperatures.	Warm the engine before driving, the CVT drive belt will become more flexible and prevent belt burning.
Slow throttle and easy CVT engagement.	Use the throttle with purpose and effectively for efficient CVT clutch engagement.
Towing/pushing at low RPM/low ground speed.	Use low gear only.
Utility use/plowing snow, dirt, etc.	Use low gear only.
Heavy vehicle load operating at low speed.	Use low gear only.
Stuck in mud or snow.	Shift the transmission to low gear, and carefully use fast, aggressive throttle application to engage CVT.WARNING: Excessive throttle may cause loss of control and vehicle overturn.
Climbing over large objects from a stopped position.	Shift the transmission to low gear, and carefully use fast, brief, aggressive throttle application to engage the CVT.WARNING: Excessive throttle may cause loss of control and vehicle overturn.
Belt slipping from water or snow ingestion into the CVT system.	Drain the water from the CVT housing and dry the CVT if possible, or contact your dealer.

This CVT Belt (0NYV-054000-5000) fits the following CFMoto ZForce series models:

• OEM OE Quality: Manufactured by Mitsuboshi to original specifications, ensuring identical performance and durability.
• High-Strength Material: Constructed from high-modulus, heat-resistant composite materials to withstand high torque and high temperatures.
• Precise Dimensions: Accurate width and circumference ensure a perfect fit on the pulleys for efficient power transfer without slipping.
• Direct Replacement: Designed for bolt-on installation with perfect match to the CVT system – no modifications required.
• Restores CVT Performance: Replaces a worn or glazed belt, eliminating slipping, shudder, and restoring acceleration.
• Enhances Driving Experience: Ensures smooth power delivery, improving ride comfort and reliability.

🛑 The Importance of the CVT Belt

The CVT belt is the core power transmission element of the continuously variable transmission. It transfers engine power from the driving pulley to the driven pulley, and varying its effective diameter on the pulleys provides the stepless gear ratio. Operating under harsh conditions (high load, high temperature, high RPM), the belt is a primary wear item in the CVT system. A worn, glazed, or damaged belt leads to poor acceleration, take-off shudder, reduced top speed, and can even break suddenly, leaving you stranded. Regularly inspecting and replacing the CVT belt with this OEM-quality part is essential maintenance to preserve vehicle performance and avoid breakdowns. Please also refer to the operating guide above to maximize the life of your new belt.

⚠️ Fitment Note: This part is the Mitsuboshi CVT Belt, part #0NYV-054000-5000, size 37.4*1122mm. It fits specific CFMoto ZForce series models (Z10/Z10-4). Always verify your original part number and belt specifications before ordering.