High Tension Cable 1

🔧 CFMoto High Tension Cable 1

📦 Part Number: 9AWV-003200-8000

⚡ Ignition Cable · Spark Plug Wire · OEM Specification

📍 Installation Position: Ignition Coil to Spark Plug

✅ OEM Quality · Efficient Conduction · Fits CFMoto CForce 1000/850 & UForce 800 Series

This product is a CFMoto OEM-spec high tension cable 1 (ignition cable / spark plug wire), part number 9AWV-003200-8000. This cable connects the ignition coil to the spark plug, transmitting high voltage from the ignition coil to the spark plug to ignite the air-fuel mixture in the engine cylinder. Manufactured with high-quality conductive core material and high-temperature resistant insulation, it offers excellent conductivity and aging resistance, ensuring stable ignition energy transmission.

Over time, the ignition cable may experience insulation aging, cracking, leakage, or increased resistance, leading to insufficient ignition energy, engine misfire, rough idle, poor acceleration, hard starting, or stalling. Timely replacement of aged or damaged ignition cables is essential to maintain proper engine operation.

• ✅ OEM Specification: Manufactured strictly to CFMoto original technical standards; length and connectors are identical to the original part.
• ⚡ Efficient Conduction: High-quality conductive core with low resistance for efficient ignition energy transmission.
• 🛡️ High-Temperature Insulation: Outer layer made from heat-resistant, aging-resistant insulating material to prevent leakage and breakdown.
• 🔧 Direct Replacement: Directly replaces aged, cracked, or leaking original ignition cables.
• 🔥 Ensures Ignition Performance: Guarantees adequate spark energy for smooth engine operation.

✅ Signs Your Ignition Cable Needs Replacement:
• Rough idle, engine misfire.
• Poor acceleration, hesitation.
• Hard starting or stalling.
• Check engine light illuminated (misfire codes).
• Insulation is aged, cracked, or leaking (visible spark in dark).
• Excessive carbon buildup on spark plugs (weak ignition).
If any of these symptoms occur, replace the ignition cable promptly.

✅ Installation Tips:
1. Ensure the engine is off and cool before installation.
2. When removing the old cable, note the routing path.
3. Inspect spark plug terminal and ignition coil terminal for cleanliness and damage.
4. When installing the new cable, ensure both ends are fully seated with a "click" sound.
5. Route the cable along the original path, avoiding contact with hot components or sharp edges.
6. It is recommended to inspect spark plugs at the same time and replace if necessary.
7. After installation, start the engine and check for misfire.
Professional installation is recommended.

⚠️ Important Notice: This product is a CFMoto high tension cable 1, part number 9AWV-003200-8000. Fits the CFMoto CForce 1000, CForce 850, and UForce 800 XL series models listed above. Minor differences may exist between production batches. If your specific model is not listed, please contact customer service with your VIN for compatibility confirmation. Images are for reference only; actual product may vary.