Weight Slider Assy

CF Moto Weight Slider Assy for DRIVE PULLEY

Part Number: 0JYV-051110-5000

Product Type: CVT Transmission | Variator Roller / Slider Weight

Fitment: CFMoto 1000cc Series ATV (CForce 1000 TOURING / OVERLAND / MV)

OEM-specification weight slider assembly for the drive pulley (variator). Designed for CFMoto 1000cc series ATV models, including CForce 1000 TOURING, OVERLAND, and MV, these are critical components of the CVT system that control ratio changes via centrifugal force, directly affecting acceleration and transmission efficiency.

This product is a genuine CF Moto weight slider assembly for the drive pulley, commonly known as variator rollers or sliders, part number 0JYV-051110-5000. This assembly is a core component of the CVT (Continuously Variable Transmission) drive pulley (variator). A set of these weight sliders sits in ramps within the drive pulley. As engine RPM increases, centrifugal force pushes them outward, forcing the drive pulley to change its effective diameter and thus providing seamless ratio changes. These slider assemblies are manufactured from wear-resistant polymer with a precision-weighted metal core, ensuring smooth, responsive, and durable CVT operation. Suitable for CVT system service or performance maintenance on CFMoto 1000cc ATV models, specifically for those built on the 2V91Y-F platform.

Key Specifications:

• Part Number: 0JYV-051110-5000
• Product Name: Weight Slider Assy for Drive Pulley
• Common Name: Variator Roller / Slider Weight
• Platform: 2V91Y-F
• Engine Size: 1000cc

• OEM Match: Part number 0JYV-051110-5000 corresponds exactly with the CFMoto official parts system, ensuring direct replacement.
• Precise Weighting: Each slider's weight is strictly controlled to maintain factory CVT shift characteristics for smooth acceleration.
• Wear-Resistant Material: Outer layer made of high-strength, wear-resistant engineering plastic with a precision-weighted metal core for durability and accuracy.
• Optimized Performance: Properly functioning sliders ensure the drive pulley changes diameter at the optimal RPM for efficient power delivery and throttle response.
• Reduced Friction: High-quality materials minimize friction between the slider and the pulley ramp, extending the life of the entire CVT system.
• Essential for Maintenance: Must be replaced if experiencing jerky starts, sluggish acceleration, uneven shifting, or if sliders show visible wear.

✅ Fault Indications: Common signs of worn or damaged weight sliders include:
• Jerking or hesitation during takeoff or low-speed operation;
• Sluggish acceleration, with RPM rising but speed not increasing accordingly;
• Unusual noises from the CVT area (rubbing, rattling);
• Uneven or rough shifting, feeling of belt slippage;
• Upon inspection, sliders show flat spots, cracks, or deformation.
If these symptoms occur, inspect and replace the weight sliders immediately.

✅ Installation Tip: Before installing new sliders, thoroughly clean the drive pulley ramps, ensuring they are free of oil and debris. Always replace the sliders as a complete set to ensure uniform weight. After installation, check that the sliders move freely within their ramps. Professional installation by an experienced technician is recommended.

⚠️ Important Notice: This product is a CF Moto weight slider assembly for the drive pulley, part number 0JYV-051110-5000. It is applicable for the 1000cc ATV models (2V91Y-F platform) listed above. Minor variations may exist between different model years or production batches. If your specific model is not listed, please contact our customer service with your VIN for compatibility verification. Images are for reference only; the actual product may vary due to improvements.