Oil Pump Solid Gear

CFMoto Oil Pump Plastic Gear (Drive Gear)

OEM Part Number: 0GR0-070004

Product Type: Oil Pump Drive Gear | Plastic Gear

Specifications: 37 Teeth / 78mm Outer Diameter

Compatible with CFMoto 400cc / 450cc / 500cc / 520cc / 550cc / 600cc / 625cc models, equipped with 191Q / 191R / 191S series engines

This product is a genuine CFMoto oil pump plastic gear (also known as drive gear), part number 0GR0-070004. This gear is a key component of the engine lubrication system. It is driven by the crankshaft or balance shaft and drives the oil pump to provide continuous and stable oil pressure for the engine. Manufactured from high-quality engineering plastic, it offers excellent wear resistance and fatigue resistance, ensuring long-term stable operation of the oil pump.

Key Specifications:

• Teeth: 37 Teeth
• Outer Diameter: 78mm

Compatible with a wide range of CFMoto ATV and UTV models from 400cc to 625cc displacement, covering the 191Q, 191R, and 191S engine series.

• OEM Part Number 0GR0-070004: Direct replacement, fully corresponding to the CFMoto official parts system.
• Precision Injection Molding: Manufactured using high-precision molds for accurate tooth profiles, smooth meshing with metal gears, and low operating noise.
• High-Quality Engineering Plastic: Made from specialized engineering plastic with high strength, toughness, and excellent wear resistance, capable of withstanding long-term immersion in engine oil.
• Fatigue-Resistant Design: The material offers good fatigue resistance to withstand continuous alternating loads during engine operation, ensuring long service life.
• Lubrication System Key Component: As the drive gear for the oil pump, its reliability directly affects engine lubrication effectiveness and overall lifespan.

🔧 Important Installation Note: The oil pump gear is located inside the engine, and replacement typically requires opening the engine casing. Professional installation by an experienced technician is highly recommended. Key considerations:

• When replacing the gear, it is recommended to inspect the oil pump, balance shaft gear, and related bearings.
• When installing the new gear, ensure the meshing clearance with the mating gear meets technical specifications.
• During engine reassembly, use new gaskets and strictly follow the torque specifications and procedures in the official service manual.
• After installation, add appropriate engine oil and check that oil pressure is normal.

⚠️ Ordering Information: This product is an oil pump plastic gear (drive gear), part number 0GR0-070004, specifications 37 teeth/78mm. Minor differences may exist between different years or batches. If your vehicle is not listed in the complete list above, or if you have questions about compatibility, please contact customer service with your VIN or engine model for confirmation.