Oil Strainer Assy
- Brand: Mortch Motor
- Product Code: MICF0LTV-070200-1000
- Product Viewed: 14
- Availability: In Stock
- Weight: 0.05kg
US$0.20
| Shipping To： |
🔧 CFMoto Oil Strainer Assembly
📦 Part Number: 0LTV-070200-1000
⚙️ Oil Strainer Assy · Oil Filter Assembly · OEM Spec
📍 Installation Location: Engine lubrication system / Oil filter housing
✅ Single unit · Premium filter media · Direct fit · Compatible with CFMoto 196T engine
This is a CFMoto OEM-spec Oil Strainer Assembly (oil filter), part number 0LTV-070200-1000, sold as a single unit. This assembly is a core component of the engine lubrication system, installed on the oil filter housing. It filters out metal particles, carbon deposits, dust, and other contaminants generated during engine operation, ensuring that clean oil is continuously supplied to all moving parts — reducing wear and extending engine service life.
Over time, the oil filter media becomes clogged with trapped contaminants, reducing filtration efficiency. The bypass valve may open, allowing unfiltered oil to enter the lubrication system and accelerate engine wear. Regular replacement with an OEM-spec oil filter assembly at recommended service intervals is the most fundamental and important maintenance practice for keeping your engine in healthy condition.
✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Filter dimensions, filtration efficiency, and bypass valve pressure rating are identical to the genuine part, ensuring a perfect replacement and reliable filtration performance.
This Oil Strainer Assembly (part number 0LTV-070200-1000, single unit) fits the following CFMoto engine:
- 2027 · ENGINE · 196T
📌 Fitment Note: This oil filter assembly fits the CFMoto 196T engine. Sold as a single unit. It is recommended to replace the oil filter with every oil change to ensure optimal filtration and engine protection. If your engine model is not listed, please contact us with your engine number to confirm compatibility.
- ✅ OEM Original Spec: Manufactured to CFMoto original technical standards; filter dimensions, filtration efficiency, and bypass valve specs match the genuine part exactly.
- 🛡️ High-Efficiency Filtration: Made from premium micro-porous filter paper with high filtration efficiency and dirt-holding capacity to effectively trap harmful contaminants.
- 🔧 Direct Fitment: Thread size and sealing ring dimensions match the original for a direct replacement with no modifications.
- 💪 Reliable Bypass Valve: Precision bypass valve ensures oil circulation continues even if the filter becomes clogged, preventing engine oil starvation.
- 🔄 Regular Replacement: Recommended to replace with every oil change to keep the lubrication system in optimal condition.
• At the mileage or time interval specified in the vehicle maintenance schedule.
• Oil pressure warning light illuminates or oil pressure reads abnormally low.
• When changing engine oil — always replace the filter simultaneously for a complete service.
• Unusual engine wear noises that may indicate filter failure.
• Filter housing shows severe rust, deformation, or seal ring aging/leaking.
Regular oil filter replacement is one of the most effective ways to protect your engine and extend its service life.
1. Confirm the filter is the correct 0LTV-070200-1000 matching the original.
2. Warm up the engine to operating temperature, then drain the old oil.
3. Use a proper filter wrench to remove the old filter — be careful of hot oil.
4. Clean the filter mounting surface and remove any residue from the old seal.
5. Apply a small amount of fresh oil to the new filter's sealing ring, then hand-tighten until the seal contacts the mounting surface.
6. Tighten an additional 3/4 to 1 turn by hand (or follow torque specifications on the filter).
7. Fill with fresh oil to the proper level, start the engine and run briefly, then check for leaks around the filter.
8. Stop the engine, recheck oil level, and top up if needed.
Installation is DIY-friendly, but be cautious of hot oil to avoid burns.
- Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
- We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.
- Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
- Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.
- All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
- In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.
Thank You
Please tell your friends about our Oil Strainer Assy