2V91W-F 2V91Y-F Water Pump Impeller

CFMoto Water Pump Impeller

Part Number: 0JWV-080003-3000

Product Type: Cooling System | Water Pump Impeller

Material: High-Strength Aluminum Alloy

Fitment Series: Touring / XL / Overland / MV

OEM-specification water pump impeller, manufactured from high-strength aluminum alloy. It is the core component of the water pump assembly, responsible for circulating coolant through the engine. Compatible with CFMoto 800cc and 1000cc Touring, XL, Overland, and MV series models. Compared to plastic impellers, the aluminum alloy offers superior strength, better thermal conductivity, and enhanced fatigue resistance, effectively preventing loosening, cracking, or slippage for reliable engine cooling protection.

This product is a genuine CFMoto water pump impeller, part number 0JWV-080003-3000, manufactured from high-strength aluminum alloy. This impeller is the core component of the engine cooling system's water pump. Mounted on the water pump shaft, it rotates to create centrifugal force, drawing coolant from the radiator and pressurizing it to circulate through the engine block, cylinder heads, and other components requiring cooling, maintaining optimal engine operating temperature.

✨ Advantages of Aluminum Impeller Upgrade:

• Permanently Solves Common Issues: Original plastic impellers, exposed to hot coolant over time, can age and become brittle, leading to loosening on the shaft, slippage, or even blade breakage. This causes pump failure and engine overheating. The aluminum impeller completely eliminates this problem.
• High Strength, Never Deforms: Aluminum alloy offers exceptional strength and rigidity, handling higher speeds and torque, ensuring a permanent, tight fit with the shaft.
• Superior Thermal Conductivity: The metal impeller transfers heat away from the shaft more efficiently, indirectly improving the operating environment for the water seal.
• Corrosion Resistant: Surface-treated for excellent resistance to coolant corrosion, maintaining performance over the long term.
• Upgrade Once, Worry-Free: Replacing with this aluminum impeller eliminates the premature failure common with plastic impellers, significantly extending the water pump's lifespan.

• OEM Match: Part number 0JWV-080003-3000 corresponds exactly with the CFMoto official parts system, ensuring direct replacement without any modifications.
• Aluminum Alloy Advantage: Made from high-strength aluminum alloy, completely eliminating common issues of plastic impellers like aging, loosening, and cracking, significantly extending service life.
• Efficient Pumping Capacity: Precision-engineered blades with optimized angles and curvature ensure adequate coolant flow and pressure across all RPM ranges.
• Precision Bore Fit: High-precision center bore ensures a tight fit with the pump shaft, effectively preventing loosening, slippage, or eccentric rotation.
• Corrosion Resistance: Surface-treated for excellent resistance to coolant corrosion, maintaining performance over the long term.

✅ Fault Indications: Common signs of water pump impeller failure include:
• Engine overheating, especially under high load or at idle;
• Insufficient or inconsistent heater output;
• Large temperature difference between upper and lower radiator hoses (indicating poor coolant circulation);
• Upon disassembling the old pump, finding the impeller loose on the shaft, damaged blades, or severe corrosion.
If these occur, inspect and replace the water pump impeller or assembly promptly.

✅ Installation Tip: When replacing the impeller, it is recommended to also replace seals such as the water seal and oil seal to ensure overall reliability. Clean the pump shaft and impeller bore before installation, ensuring they are free of oil and debris. Use a proper tool to press the impeller into place, avoiding hammer blows that could cause damage. After installation, check that the impeller rotates freely and test the cooling system for leaks. Professional installation by an experienced technician is recommended.

⚠️ Important Notice: This product is a CFMoto aluminum water pump impeller, part number 0JWV-080003-3000. It is applicable for the 800cc and 1000cc Touring, XL, Overland, and MV series models listed above. Minor variations may exist between different model years or production batches. If your specific model is not listed, please contact our customer service with your VIN for compatibility verification. Images are for reference only; the actual product may vary.