Turn Signal Switch Button

Turn Signal Switch (3-Pin Connection)

🔄 Turn Signal Switch · Direction Switch · 3-Pin Connector

For GY6 125cc/150cc Sport Style Scooters · OEM Specification

This is a Turn Signal Switch with a 3-pin connection, specifically designed for GY6 125cc/150cc Sport Style scooters. The turn signal switch is the core control component of the vehicle's signaling system, used to activate the left or right turn signals to communicate your intended direction to other road users.

Manufactured with quality materials and precision molds, this switch provides excellent tactile feel and reliable electrical connections. It is an ideal replacement when the original turn signal switch fails due to aging, water damage, or wear. This switch also fits many other makes and models of scooters, motorcycles, and ATVs.

Turn signals are among the most important signaling devices on a vehicle, and the turn signal switch is the key component that controls them:

• Communicate Intent: Informs other road users of your intended direction for turns, lane changes, or merging.
• Accident Prevention: Proper use of turn signals significantly reduces the risk of accidents caused by sudden lane changes or turns.
• Legal Requirement: Traffic laws worldwide require the use of turn signals when turning or changing lanes.
• Self-Canceling: Many turn signal switches automatically return to the center position after the turn is completed.
• Timely Replacement: Replace immediately if the turn signal switch fails or shows signs of poor contact to ensure riding safety.

How It Works: The turn signal switch uses a sliding contact design. When pushed left or right, it connects the circuit for the corresponding side while disconnecting the other. When released, the switch automatically returns to the center position, turning off the signals. Some models also feature auto-canceling turn signals that reset after the steering returns to center.

This turn signal switch primarily fits the following vehicles:

• GY6 125cc Sport Style Scooters
• GY6 150cc Sport Style Scooters
• Big Turtle / Little Turtle series
• Haojue / Kymco GY6 series
• Other scooters, motorcycles, and ATVs using 3-pin turn signal switches

• No Flash: Turn signals do not illuminate at all when the switch is activated, or only one side works.
• Abnormal Flashing: Turn signals flash too fast, too slow, or stay constantly on without flashing.
• Intermittent Operation: Requires multiple switch activations to work, or signals cut out due to vibration while riding.
• Doesn't Cancel: Switch fails to return to center after completing the turn, signals stay on.
• Stiff Operation: Switch feels notchy or difficult to move.
• One Side Only: Only one side works, the other side has no response.

If you experience these symptoms, first check the flasher relay and bulbs. If they are functioning normally, inspect or replace the turn signal switch.

• OEM Specifications: Manufactured to GY6 sport style scooter original specifications.
• 3-Pin Connection: Standard 3-pin design for perfect harness compatibility.
• Quality Contacts: Copper sliding contacts for excellent conductivity and wear resistance.
• Self-Canceling: Automatically returns to center position after activation for convenience.
• Weather-Resistant: Designed to withstand various weather conditions.
• Crisp Tactile Feel: Distinct position feel with clear operational feedback.
• Direct Replacement: Perfect substitute for damaged or worn original turn signal switches.

🔧 Installation Tips

1. Disconnect the negative battery terminal before installation to prevent accidental shorts.
2. Locate the turn signal switch on the left handlebar switch assembly and remove the old switch.
3. Install the new turn signal switch, ensuring it is securely mounted.
4. Connect the 3-pin connector, ensuring proper orientation and full insertion.
5. Reconnect the battery and test both left and right turn signal functions.
6. Verify that the flashing frequency is normal before use.

⚠️ Important Notice: This is a turn signal switch with 3-pin connection, specifically designed for GY6 125cc/150cc sport style scooters. It also fits many other makes and models of scooters, motorcycles, and ATVs. Before purchasing, please verify that your original turn signal switch has a 3-pin connector. The turn signal switch is a critical component for riding safety; ensure proper installation and testing before use. Images are for reference only. The actual product may vary.