Rear Lower RH Swing Arm Assy

🔧 CFMoto Rear Lower RH Swing Arm Assembly

📦 Part Number: 7000-060210

🔧 Rear Lower Control Arm · OEM Specification

📍 Installation Position: Rear Suspension · Lower Right Side

✅ OEM Quality · High-Strength Steel · Fits CFMoto ZForce / UForce Series

This product is a CFMoto OEM-spec rear lower right-hand swing arm assembly (lower control arm), part number 7000-060210. This swing arm is a core component of the rear suspension system, installed on the lower right side of the rear axle, connecting the frame to the rear wheel hub. It withstands lateral and longitudinal forces during driving, ensuring accurate wheel alignment. Manufactured from high-strength steel with precision welding and anti-corrosion treatment, it offers excellent rigidity and durability.

Over time, the swing arm may become deformed, cracked, or experience bushing wear or ball joint looseness, leading to pulling, uneven tire wear, noise, or poor handling. Timely replacement of a damaged swing arm assembly is essential to restore vehicle handling stability and driving safety.

• ✅ OEM Specification: Manufactured strictly to CFMoto original technical standards; mounting hole positions are identical to the original part.
• 💪 High-Strength Steel: Made from premium high-strength steel with excellent rigidity and impact resistance.
• 🔧 Precision Welding: Uniform and strong welds for reliable structural strength.
• 🛡️ Anti-Corrosion Treatment: Surface coated with anti-rust treatment for excellent corrosion resistance.
• 🔩 Direct Replacement: Directly replaces deformed, cracked, or damaged original swing arm assemblies.
• 🚗 Restores Handling: Replacing the swing arm restores proper suspension geometry and improves handling stability.

✅ Signs Your Rear Swing Arm Needs Replacement:
• Vehicle pulls to one side or steering feels unstable.
• Uneven or abnormal tire wear.
• Unusual noise from the rear suspension when driving on rough roads.
• Visible deformation, cracks, or severe rust on the swing arm.
• Bushing is cracked, hardened, or ball joint is loose.
• Swing arm is deformed after an accident or impact.
If any of these symptoms occur, replace the rear swing arm assembly promptly.

✅ Installation Tips:
1. Ensure the vehicle is on level ground and supported with safety stands before installation.
2. Remove the wheel and brake caliper, being careful to protect brake lines.
3. Support the rear axle and remove the old swing arm mounting bolts.
4. Inspect bushings, ball joints, and mounting holes for damage.
5. Install the new swing arm assembly and tighten bolts to factory torque specifications.
6. It is recommended to replace bushings and ball joints at the same time as the swing arm.
7. After installation, perform a wheel alignment to ensure correct suspension geometry.
⚠️ Suspension work is safety-critical. Professional installation is strongly recommended.

⚠️ Important Notice: This product is a CFMoto rear lower RH swing arm assembly, part number 7000-060210. Fits the CFMoto SSV and UTV models listed above. Minor differences may exist between production batches. If your specific model is not listed, please contact customer service with your VIN for compatibility confirmation. Images are for reference only; actual product may vary.