Primary Clutch Shoe Assy
- Brand: Mortch Motor
- Product Code: MICFL-190180021-0001
- Product Viewed: 19
- Availability: Pre-Order 1-2 Weeks🔔
- Weight: 0.75kg
US$17.60 4 SOLD
| Shipping To： |
🔧 CFMoto Primary Clutch Shoe Assembly
📦 Part Number: L-190180021-0001
⚙️ Primary Clutch Shoe Assy · CVT Drive Pulley Shoes · OEM Spec
📍 Installation Location: CVT transmission / Inside primary clutch drive pulley
✅ Single unit · Premium friction material · Direct fit · Compatible with multiple CFMoto 110cc ATV models
This is a CFMoto OEM-spec Primary Clutch Shoe Assembly, part number L-190180021-0001, sold as a single unit. This shoe assembly is the core actuating component of the primary clutch (drive pulley) assembly in the CVT (Continuously Variable Transmission) system. It is installed inside the primary clutch housing and consists of centrifugal shoes, friction pads, springs, and a retaining frame. As engine RPM increases, the shoes swing outward under centrifugal force, making frictional contact with the clutch housing to transfer power from the crankshaft to the CVT drive belt — enabling vehicle takeoff and speed variation.
Over time, the friction material on the shoes wears down, and the springs may lose tension or fatigue. This can result in CVT slipping, jerky takeoff, poor acceleration, or reduced transmission efficiency. Regular inspection and replacement with an OEM-spec shoe assembly when worn is an essential maintenance practice to restore CVT power transfer efficiency and driving performance.
✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Friction material formulation, shoe weight, and spring parameters are identical to the genuine part, ensuring a perfect replacement and reliable power transfer performance.
This Primary Clutch Shoe Assembly (part number L-190180021-0001, single unit) fits the following CFMoto 110cc ATV models:
- CF110AY10 · CForce 110 PETROL
- CF110AY10(AU) · CForce 110
- CF110AY10(CA) · CForce 110
- CF110AY10(CLASSIC)(CA) · CForce 110 CLASSIC
- CF110AY10(GD) · CForce 110
- CF110AY10(HLG) · CForce 110
- CF110AY10(RU) · CForce 110
- CF110AY10(SS) · CForce 110
- CF110AY10(ST) · CForce 110
- CF110AY10(US) · CForce 110
📌 Fitment Note: This shoe assembly fits the listed CFMoto 110cc ATV models (1P52YH-2 engine). Sold as a single unit containing a complete set of shoes. It is recommended to inspect shoe wear when experiencing CVT slipping, jerky takeoff, or poor acceleration, and replace if necessary. If your specific model is not listed, please contact us with your VIN to confirm compatibility.
- ✅ OEM Original Spec: Manufactured to CFMoto original technical standards; friction material formulation, shoe weight, and spring parameters match the genuine part exactly.
- 🛡️ Premium Friction Material: Made with high-performance friction material offering excellent wear resistance, heat resistance, and consistent friction coefficient for reliable power transfer.
- 🔧 Precision Matched: Shoe weight and spring tension are precisely matched to ensure correct engagement RPM and smooth takeoff performance.
- 💪 Direct Fitment: Direct replacement for the original part — no modifications or adaptations required.
- 🔄 Direct Replacement: Replaces worn, slipping, or spring-failed original shoe assemblies.
• Noticeable jerking or shuddering during vehicle takeoff.
• Engine RPM rises but vehicle speed increases slowly during acceleration (CVT slipping).
• Poor power delivery when climbing or under heavy load — noticeably reduced CVT efficiency.
• Upon disassembly, shoe friction material is severely worn, glazed, or unevenly worn.
• Shoe springs are broken, deformed, or have significantly reduced tension.
If any of these occur, inspect and replace the shoe assembly promptly to prevent further CVT system damage.
1. Confirm the shoe assembly is the correct L-190180021-0001 matching the original.
2. Remove the CVT cover and drive belt, then take out the primary clutch assembly.
3. Use a special tool to compress the clutch spring and remove the housing retaining nut to open the clutch housing.
4. Remove the old shoe assembly, noting the spring positions and orientation.
5. Clean the inside of the housing and shoe guide surfaces, removing wear dust and debris.
6. Install the new shoe assembly in the correct orientation and position, ensuring each shoe moves freely.
7. Close the clutch housing, install the retaining nut, and torque to OEM specifications.
8. Reinstall the CVT drive belt and cover, ensuring all fasteners are torqued to specifications.
9. Start the engine and perform takeoff and acceleration tests to confirm smooth CVT operation.
Installation requires special tools and CVT service experience; professional installation recommended.
- Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
- We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.
- Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
- Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.
- All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
- In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.
Thank You
Please tell your friends about our Primary Clutch Shoe Assy