Air Filter Assy
- Brand: Mortch Motor
- Product Code: MICF0JYV-110000-4000
- Product Viewed: 6
- Availability: Pre-Order 1-2 Weeks🔔
- Weight: 1.75g
US$108.82
| Shipping To: |
🔧 CFMoto Air Filter Assembly
📦 Part Number: 0JYV-110000-4000
⚙️ Air Filter Assy · Air Cleaner Assembly · OEM Spec
📍 Installation Location: Engine intake system / Air filter housing
✅ Single unit · Premium filter media · Direct fit · Compatible with multiple CFMoto SSV ZForce models
🔧 Filter Element Part Number: 0JYA-112000-3000 (Replaceable separately)
This is a CFMoto OEM-spec Air Filter Assembly, part number 0JYV-110000-4000, sold as a single unit. This assembly is a core component of the engine intake system, including the filter housing, filter element, and seals. Installed upstream of the throttle body, it filters dust, sand, and other contaminants from the air entering the engine — ensuring only clean air reaches the combustion chamber. It is a critical component for protecting the engine from wear and extending service life.
Over time, the filter element becomes clogged with trapped dust and debris, increasing intake resistance and causing reduced engine power and poor fuel economy. Regular replacement with an OEM-spec air filter assembly at recommended intervals is an essential maintenance practice to keep the engine operating at its best.
✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Housing dimensions, filter media efficiency, and sealing performance are identical to the genuine part, ensuring a perfect replacement and reliable filtration.
This Air Filter Assembly (part number 0JYV-110000-4000, single unit) fits the following CFMoto SSV models:
- 2022-2024 CF1000SZ-D · ZForce 950 HO EX
- 2022-2023 CF1000SZ-E · ZForce 950 HO Sport
- 2023-2025 CF1000UTR-C · ZForce 1000 Sport
📌 Fitment Note: This air filter assembly fits the listed CFMoto SSV models. Sold as a single unit. Replace regularly according to the maintenance schedule in your owner's manual. If your specific model is not listed, please contact us with your VIN to confirm compatibility.
- ✅ OEM Original Spec: Manufactured to CFMoto original technical standards; housing dimensions, filter media efficiency, and sealing match the genuine part exactly.
- 🛡️ High-Efficiency Filtration: Made from premium micro-porous filter paper with excellent filtration efficiency and dirt-holding capacity.
- 🔧 Direct Fitment: Complete assembly replacement — easy installation with no modifications required.
- 💪 Reliable Sealing: OEM-spec seal design ensures unfiltered air cannot bypass the filter element.
- 🔄 Regular Replacement: Replace at recommended service intervals to maintain optimal intake air quality.
- 🔧 Filter Element Available Separately: For filter element only replacement, use part number 0JYA-112000-3000.
• At the mileage or time interval specified in the vehicle maintenance schedule.
• Filter element is visibly clogged with dust — little or no light passes through when inspected.
• Reduced engine power, poor acceleration, or sluggish response.
• Increased fuel consumption — noticeably worse fuel economy.
• After operating in dusty or sandy conditions, replace earlier than scheduled.
Regular air filter replacement is one of the most effective ways to protect your engine and extend its service life.
1. Confirm the assembly is the correct 0JYV-110000-4000 matching the original.
2. Remove the air filter housing cover or fasteners and take out the old assembly.
3. Clean the inside of the filter housing to remove dust and debris.
4. Inspect the intake duct for damage or loose connections.
5. Install the new assembly in the correct orientation, ensuring proper alignment.
6. Check that the housing seal or sealing surface is intact, then reinstall the cover and tighten fasteners.
7. Verify all housing connections are sealed properly with no air leaks.
Installation is simple and DIY-friendly.
🔧 Filter element available separately: 0JYA-112000-3000.
- Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
- We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.
- Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
- Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.
- All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
- In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.





Thank You