Front Position Light
- Brand: Mortch Motor
- Product Code: MICF9AWV-160400-1800
- Product Viewed: 4
- Availability: In Stock
- Weight: 0.90kg
US$72.21
| Shipping To： |
🔧 CFMoto Front Position Light
📦 Part Number: 9AWV-160400-8001 (Replaced by: 9AWV-160400-1800)
⚙️ Front Position Light · Parking Light · OEM Specification
📍 Installation Position: Vehicle Front / Headlight Assembly / Front Trim Panel
✅ LED/Halogen Light Source · High Brightness · Low Power Consumption · OEM Quality · Suitable for Multiple CFMoto ATV Models
This product is a CFMoto OEM specification front position light (parking light), part number 9AWV-160400-8001, replaced by part number 9AWV-160400-1800. The front position light is installed at the front of the vehicle to indicate the vehicle's width and position during nighttime or low visibility conditions, enhancing forward visibility. It is an important component of the vehicle lighting system.
Over time, the front position light may experience LED/bulb failure, brightness degradation, lens aging, or water ingress, affecting nighttime driving safety. Regular inspection and timely replacement of a damaged front position light are critical to ensuring proper lighting system operation and driving safety.
✅ OEM Quality Assurance: Manufactured strictly to CFMoto original technical standards. Dimensions and connector specifications are fully consistent with original parts, ensuring perfect replacement and reliable lighting performance.
This front position light (Part Number 9AWV-160400-8001 / 9AWV-160400-1800) is compatible with the following CFMoto models:
- CF1000AU-2 (2025-2026) · CForce 1000 X10 Overland
- CF1000AZ-2 (2024-2025) · CForce 1000 Touring
- CF1000AZ-2A (2025) · CForce 1000 Overland
- CF800AU-3 (2025-2026) · CForce 850 X8 Touring
📌 Fitment Note: This front position light is suitable for the CFMoto ATV models listed above. If your specific model is not listed, please contact us with your VIN for compatibility confirmation.
- ✅ OEM Original Specification: Manufactured strictly to CFMoto original technical standards. Mounting dimensions match original parts completely.
- 🛡️ High Brightness: Provides excellent visibility for enhanced driving safety.
- 🔧 Low Power Consumption: Reduces electrical system load.
- 💪 Good Weather Resistance: UV-resistant lens material resists aging and yellowing.
- 🔌 OEM Connector: Standard OEM connector for plug-and-play installation, no wiring modification required.
- 🔄 Direct Replacement: Directly replaces damaged, water-ingressed, or non-functioning original front position lights.
- 📌 Replacement Note: This product replaces original part number 9AWV-160400-8001 with new part number 9AWV-160400-1800. Function and installation are identical.
• Front position light does not illuminate or has significantly reduced brightness.
• Water ingress, fogging, or yellowing inside the lens.
• Some LED chips are not working or flickering.
• Cracked housing or broken mounting clips.
• Corroded connector or poor electrical contact.
If you experience any of these symptoms, please inspect and replace the front position light promptly.
1. Turn off the vehicle power before replacement to avoid short circuits.
2. Remove the original front position light, taking care to save mounting screws and clips.
3. Clean the mounting area, ensuring no mud or debris.
4. Connect the new light to the wiring harness connector, ensuring a secure fit.
5. Install the light assembly and tighten screws or secure clips.
6. Restore power and test the light for proper illumination.
Professional installation by a qualified technician is recommended.
- Please verify that this part fits your specific vehicle model and year. Many vehicles share similar names but use different components depending on year or market region.
- We strongly recommend cross-checking with your vehicle's owner's manual or contacting us for confirmation before placing your order.
- Product images, measurements, and descriptions are for reference only. Slight variations in color or appearance may occur due to manufacturing batches or photography lighting—functional specifications remain identical to the ordered part.
- Professional installation is mandatory. Mortch Motor assumes no liability for damages, injuries, or losses resulting from improper installation, misuse, unauthorized modification, or abnormal operation.
- All listed prices EXCLUDE shipping costs, import duties, taxes, and customs clearance fees. These charges (if applicable) are determined and collected by your local customs authority and are solely the buyer's responsibility.
- In case of return due to unpaid duties/taxes or refusal to clear customs, the buyer shall bear the original shipping cost, return shipping fees, and any associated administrative charges deducted from the refund.
Thank You
Please tell your friends about our Front Position Light