RH Handlebar Switch Assy

CF Moto RH Handlebar Switch Assy

Part Number: 9GQ0-160700-00002

Connector: 4-Pin Male Plug + 6-Pin Male Plug

Product Type: Electrical Switch | Handlebar Control

Original specification right-hand handlebar switch assembly, integrating common vehicle control functions for easy operator access. This switch assembly features one 4-pin male plug and one 6-pin male plug for connection to the main vehicle wiring harness. Manufactured strictly according to CF Moto original technical standards, ensuring plug-and-play installation convenience and reliable electrical performance.

This product is an original quality CF Moto right-hand handlebar switch assembly, part number 9GQ0-160700-00002. Mounted on the right handlebar of motorcycles or ATVs, this assembly integrates key controls such as the engine start switch, engine kill switch, and headlight control switch (refer to the service manual for specific function configurations).

This switch assembly connects to the vehicle's main wiring harness using two separate plugs: a 4-pin male plug and a 6-pin male plug. This design ensures reliable electrical connection and ease of installation. The housing is made of durable plastic, and the switch buttons offer good tactile feel and resistance to dust and moisture. Produced strictly according to CF Moto original technical standards, it guarantees consistency with the original part in dimensions, connector pinout, and electrical performance, enabling a perfect direct replacement.

• Integrated Design: Combines multiple handlebar control functions into a single unit for convenient operation and a clean layout.
• Plug-and-Play: Equipped with 4-pin and 6-pin male plugs for direct connection to the original wiring harness, no modification required.
• Durable Materials: Housing made from high-strength plastic; buttons designed for good feel and environmental protection.
• Positive Tactile Feedback: Buttons provide clear actuation feedback to help prevent inadvertent operation.
• Original Standard: Performance and quality fully comply with CF Moto original specifications for long-term reliable use.

✅ Inspection Tip: Common conditions for handlebar switch assemblies:
• Individual switch buttons malfunctioning or making poor contact.
• Housing damage or water ingress causing internal shorts.
• Corroded or broken connector pins.
• Sticky buttons or abnormal tactile feel.
If any of these occur, please inspect or replace the handlebar switch assembly.

✅ Installation Tip: Before installation, verify that the connector types and pinouts match the new switch assembly. Disconnect the battery negative terminal for safety. Mount the switch assembly onto the handlebar, align the locating pin, and tighten the mounting screws to the specified torque. Securely connect the 4-pin and 6-pin plugs to the corresponding sockets on the main harness, ensuring they latch properly. Test all switch functions after installation.

⚠️ Important Notice: This product is a CF Moto RH Handlebar Switch Assy, part number 9GQ0-160700-00002, featuring 4-pin and 6-pin male plugs. It is suitable for the CF Moto ATV models listed above. Minor differences may exist between different model years or production batches. If your specific model is not listed, please contact our customer service with the Vehicle Identification Number (VIN) to verify compatibility. Images are for reference only; the actual product may vary slightly due to different batches.