Hazard Light Switch Button

Hazard Light Switch (3-Pin Connection)

⚠️ Hazard Light Switch · Emergency Flasher Switch · 3-Pin Connector

For GY6 125cc/150cc Sport Style Scooters · OEM Specification

This is a Hazard Light Switch with a 3-pin connection, specifically designed for GY6 125cc/150cc Sport Style scooters. The hazard light switch (emergency flasher switch) controls all turn signals flashing simultaneously, warning vehicles behind in emergency situations – an essential safety device.

Manufactured with quality materials and precision molds, this switch provides excellent tactile feel and reliable electrical connections. It is an ideal replacement when the original hazard light switch fails due to aging, water damage, or wear. This switch also fits many other makes and models of scooters, motorcycles, and ATVs.

The hazard light switch (emergency flasher) is a critical safety device with irreplaceable functions:

• Emergency Warning: When the vehicle breaks down, is in an accident, or makes an emergency stop, hazard lights warn following vehicles to avoid rear-end collisions.
• Adverse Weather: In fog, heavy rain, snow, or other low visibility conditions, hazard lights increase vehicle visibility.
• Temporary Stopping: When stopping temporarily on the roadside, hazard lights alert other road users.
• Legal Requirement: Many countries and regions require hazard lights to be used in emergency situations.
• Safety Component: A faulty hazard light switch can prevent the driver from activating warning lights, creating safety risks.

This hazard light switch primarily fits the following vehicles:

• GY6 125cc Sport Style Scooters
• GY6 150cc Sport Style Scooters
• Big Turtle / Little Turtle series
• Haojue / Kymco GY6 series
• Other scooters, motorcycles, and ATVs using 3-pin hazard light switches

How the hazard light switch operates:

• OFF Position: The hazard circuit is disconnected; turn signals are independently controlled by the turn signal switch.
• ON Position: When pressed or switched to ON, the hazard circuit is activated, and both left and right turn signals flash simultaneously, independent of the turn signal switch.
• Works with Flasher Relay: The hazard switch works with the turn signal flasher relay; when activated, the relay drives all turn signals to flash in sync.
• Priority Design: When hazards are on, the turn signal switch is typically overridden to ensure the warning signal is not interrupted.

• No Activation: Hazard lights do not illuminate when the switch is activated.
• Intermittent Operation: Lights flash inconsistently or require multiple presses to activate.
• One-Side Flashing: Only one side flashes when hazards are activated, or the flashing is out of sync.
• Cannot Deactivate: Hazard lights stay on and cannot be turned off after activation.
• Stiff Operation: Switch is difficult to press or feels binding.

If you experience these symptoms, inspect and replace the hazard light switch promptly.

• OEM Specifications: Manufactured to GY6 sport style scooter original specifications.
• 3-Pin Connection: Standard 3-pin design for perfect harness compatibility.
• Quality Contacts: Copper contacts for excellent conductivity and wear resistance.
• Latching/Reset Design: Push-on, push-off operation for easy use.
• Weather-Resistant: Designed to withstand various weather conditions.
• Crisp Tactile Feel: Distinct click feel with clear operational feedback.
• Direct Replacement: Perfect substitute for damaged or worn original hazard light switches.

🔧 Installation Tips

1. Disconnect the negative battery terminal before installation to prevent accidental shorts.
2. Locate the hazard light switch on the left or right handlebar switch assembly and remove the old switch.
3. Install the new hazard light switch, ensuring it is securely mounted.
4. Connect the 3-pin connector, ensuring proper orientation and full insertion.
5. Reconnect the battery and test the hazard light function.
6. Verify that all turn signals flash simultaneously when the hazard switch is activated.

⚠️ Important Notice: This is a hazard light switch (emergency flasher switch) with 3-pin connection, specifically designed for GY6 125cc/150cc sport style scooters. It also fits many other makes and models of scooters, motorcycles, and ATVs. Before purchasing, please verify that your original hazard light switch has a 3-pin connector. The hazard light switch is an essential safety device; ensure proper installation and testing before use. Images are for reference only. The actual product may vary.